\nAt the bottom of the screen is a message bar indicating the status of The Goodship. When you first start, the words “SCAN LOGO TO BEGIN” will appear. Other messages may appear here from time to time. The Goodship logo appears at the center of the message bar:<\/h5>\n
![\"\"](\"https:\/\/i0.wp.com\/workshop3d.com\/resources\/wp-content\/uploads\/2018\/10\/logo_only.png?resize=80%2C88\")
<\/a><\/h5>\nTap to display a larger image of the logo on the screen. If you have two devices, you may use this displayed logo in place of the logo on The Goodship packaging to activate the Augmented Reality model by scanning this displayed logo with a second device. Tap this logo again to dismiss the display.<\/h5>\n
\nUSAGE:<\/b>
\nAfter launching the app, aim your camera at The Goodship logo. An Augmented Reality model of The Goodship will appear idling over the logo and a toolbar will replace the message bar at the bottom of the screen.<\/h5>\n
\nTOOLBAR:<\/b>
\nThe following functions are available from the toolbar:<\/h5>\n![\"\"](\"https:\/\/i0.wp.com\/workshop3d.com\/resources\/wp-content\/uploads\/2018\/10\/launch1.png?resize=80%2C88\")
\nLaunches The Goodship into the air above the logo. Disabled after launch, but enabled again after landing.<\/h5>\n<\/h5>\n![\"\"](\"https:\/\/i0.wp.com\/workshop3d.com\/resources\/wp-content\/uploads\/2018\/10\/circle2.png?resize=80%2C88\")
\nSends The Goodship into a circular pattern in the air above the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n![\"\"](\"https:\/\/i0.wp.com\/workshop3d.com\/resources\/wp-content\/uploads\/2018\/10\/square2-1.png?resize=80%2C88\")
\nSends The Goodship into a square pattern in the air above the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n![\"\"](\"https:\/\/i0.wp.com\/workshop3d.com\/resources\/wp-content\/uploads\/2018\/10\/zigzag2.png?resize=80%2C88\")
\nSends The Goodship into a random zig-zag pattern in the air above the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n![\"\"](\"https:\/\/i0.wp.com\/workshop3d.com\/resources\/wp-content\/uploads\/2018\/10\/land1.png?resize=80%2C88\")
\nLands The Goodship back down onto the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nTIPS:<\/b><\/h5>\nNO SOUND?<\/b> The Goodship makes sounds when it is on screen. If you do not hear it, make sure that your devices is not muted (sometimes setting your phone to vibrate can do this), and the volume is turned up at least halfway.<\/h5>\nWHERE DID IT GO?<\/b> If you can hear The Goodship flying, but you can’t see it (maybe it flew away!), make sure that your Goodship logo is on screen and land it. It will land back onto the logo.<\/h5>\nJUMPY SHIP?<\/b> If The Goodship seems jittery, make sure you have good light on the logo. Also, if you move the camera away from the logo, The Goodship will continue to fly for a while, but it may become unstable eventually. Get the logo back on your screen and land The Goodship if you’ve lost it.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the product logo, use the light icon in the upper left, below the menu icon, to turn on your flash to see the target. The icon is only present if you actually have a light on your device.<\/h5>\nNO LOGO?<\/b> If you don’t have a Goodship logo to fly it from, you can print one out here<\/a>, or get a friend to download the app and display the preview logo on their screen. You should be able to launch it from there!<\/h5>\n","protected":false},"excerpt":{"rendered":"MESSAGE BAR: At the bottom of the screen is a message bar indicating the status of The Goodship. When you first start, the words “SCAN LOGO TO BEGIN” will appear. Other messages may appear here from time to time. The Goodship logo appears at the center of the message bar: Tap to display a larger<\/p>\n
![\"\"](\"https:\/\/i0.wp.com\/workshop3d.com\/resources\/wp-content\/uploads\/2018\/10\/logo_only.png\"){kind=logo}
<\/a><\/h5>\n\n
USAGE:<\/b>
\nAfter launching the app, aim your camera at The Goodship logo. An Augmented Reality model of The Goodship will appear idling over the logo and a toolbar will replace the message bar at the bottom of the screen.<\/h5>\n
\nTOOLBAR:<\/b>
\nThe following functions are available from the toolbar:<\/h5>\n
\nLaunches The Goodship into the air above the logo. Disabled after launch, but enabled again after landing.<\/h5>\n<\/h5>\n
\nSends The Goodship into a circular pattern in the air above the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nSends The Goodship into a square pattern in the air above the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nSends The Goodship into a random zig-zag pattern in the air above the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nLands The Goodship back down onto the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nTIPS:<\/b><\/h5>\nNO SOUND?<\/b> The Goodship makes sounds when it is on screen. If you do not hear it, make sure that your devices is not muted (sometimes setting your phone to vibrate can do this), and the volume is turned up at least halfway.<\/h5>\nWHERE DID IT GO?<\/b> If you can hear The Goodship flying, but you can’t see it (maybe it flew away!), make sure that your Goodship logo is on screen and land it. It will land back onto the logo.<\/h5>\nJUMPY SHIP?<\/b> If The Goodship seems jittery, make sure you have good light on the logo. Also, if you move the camera away from the logo, The Goodship will continue to fly for a while, but it may become unstable eventually. Get the logo back on your screen and land The Goodship if you’ve lost it.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the product logo, use the light icon in the upper left, below the menu icon, to turn on your flash to see the target. The icon is only present if you actually have a light on your device.<\/h5>\nNO LOGO?<\/b> If you don’t have a Goodship logo to fly it from, you can print one out here<\/a>, or get a friend to download the app and display the preview logo on their screen. You should be able to launch it from there!<\/h5>\n","protected":false},"excerpt":{"rendered":"MESSAGE BAR: At the bottom of the screen is a message bar indicating the status of The Goodship. When you first start, the words “SCAN LOGO TO BEGIN” will appear. Other messages may appear here from time to time. The Goodship logo appears at the center of the message bar: Tap to display a larger<\/p>\n
\nThe following functions are available from the toolbar:<\/h5>\n
\nLaunches The Goodship into the air above the logo. Disabled after launch, but enabled again after landing.<\/h5>\n<\/h5>\n
\nSends The Goodship into a circular pattern in the air above the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nSends The Goodship into a square pattern in the air above the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nSends The Goodship into a random zig-zag pattern in the air above the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nLands The Goodship back down onto the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nTIPS:<\/b><\/h5>\nNO SOUND?<\/b> The Goodship makes sounds when it is on screen. If you do not hear it, make sure that your devices is not muted (sometimes setting your phone to vibrate can do this), and the volume is turned up at least halfway.<\/h5>\nWHERE DID IT GO?<\/b> If you can hear The Goodship flying, but you can’t see it (maybe it flew away!), make sure that your Goodship logo is on screen and land it. It will land back onto the logo.<\/h5>\nJUMPY SHIP?<\/b> If The Goodship seems jittery, make sure you have good light on the logo. Also, if you move the camera away from the logo, The Goodship will continue to fly for a while, but it may become unstable eventually. Get the logo back on your screen and land The Goodship if you’ve lost it.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the product logo, use the light icon in the upper left, below the menu icon, to turn on your flash to see the target. The icon is only present if you actually have a light on your device.<\/h5>\nNO LOGO?<\/b> If you don’t have a Goodship logo to fly it from, you can print one out here<\/a>, or get a friend to download the app and display the preview logo on their screen. You should be able to launch it from there!<\/h5>\n","protected":false},"excerpt":{"rendered":"MESSAGE BAR: At the bottom of the screen is a message bar indicating the status of The Goodship. When you first start, the words “SCAN LOGO TO BEGIN” will appear. Other messages may appear here from time to time. The Goodship logo appears at the center of the message bar: Tap to display a larger<\/p>\n
\nSends The Goodship into a circular pattern in the air above the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nSends The Goodship into a square pattern in the air above the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nSends The Goodship into a random zig-zag pattern in the air above the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nLands The Goodship back down onto the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nTIPS:<\/b><\/h5>\nNO SOUND?<\/b> The Goodship makes sounds when it is on screen. If you do not hear it, make sure that your devices is not muted (sometimes setting your phone to vibrate can do this), and the volume is turned up at least halfway.<\/h5>\nWHERE DID IT GO?<\/b> If you can hear The Goodship flying, but you can’t see it (maybe it flew away!), make sure that your Goodship logo is on screen and land it. It will land back onto the logo.<\/h5>\nJUMPY SHIP?<\/b> If The Goodship seems jittery, make sure you have good light on the logo. Also, if you move the camera away from the logo, The Goodship will continue to fly for a while, but it may become unstable eventually. Get the logo back on your screen and land The Goodship if you’ve lost it.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the product logo, use the light icon in the upper left, below the menu icon, to turn on your flash to see the target. The icon is only present if you actually have a light on your device.<\/h5>\nNO LOGO?<\/b> If you don’t have a Goodship logo to fly it from, you can print one out here<\/a>, or get a friend to download the app and display the preview logo on their screen. You should be able to launch it from there!<\/h5>\n","protected":false},"excerpt":{"rendered":"MESSAGE BAR: At the bottom of the screen is a message bar indicating the status of The Goodship. When you first start, the words “SCAN LOGO TO BEGIN” will appear. Other messages may appear here from time to time. The Goodship logo appears at the center of the message bar: Tap to display a larger<\/p>\n
\nSends The Goodship into a square pattern in the air above the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nSends The Goodship into a random zig-zag pattern in the air above the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nLands The Goodship back down onto the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nTIPS:<\/b><\/h5>\nNO SOUND?<\/b> The Goodship makes sounds when it is on screen. If you do not hear it, make sure that your devices is not muted (sometimes setting your phone to vibrate can do this), and the volume is turned up at least halfway.<\/h5>\nWHERE DID IT GO?<\/b> If you can hear The Goodship flying, but you can’t see it (maybe it flew away!), make sure that your Goodship logo is on screen and land it. It will land back onto the logo.<\/h5>\nJUMPY SHIP?<\/b> If The Goodship seems jittery, make sure you have good light on the logo. Also, if you move the camera away from the logo, The Goodship will continue to fly for a while, but it may become unstable eventually. Get the logo back on your screen and land The Goodship if you’ve lost it.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the product logo, use the light icon in the upper left, below the menu icon, to turn on your flash to see the target. The icon is only present if you actually have a light on your device.<\/h5>\nNO LOGO?<\/b> If you don’t have a Goodship logo to fly it from, you can print one out here<\/a>, or get a friend to download the app and display the preview logo on their screen. You should be able to launch it from there!<\/h5>\n","protected":false},"excerpt":{"rendered":"MESSAGE BAR: At the bottom of the screen is a message bar indicating the status of The Goodship. When you first start, the words “SCAN LOGO TO BEGIN” will appear. Other messages may appear here from time to time. The Goodship logo appears at the center of the message bar: Tap to display a larger<\/p>\n
\nSends The Goodship into a random zig-zag pattern in the air above the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nLands The Goodship back down onto the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nTIPS:<\/b><\/h5>\nNO SOUND?<\/b> The Goodship makes sounds when it is on screen. If you do not hear it, make sure that your devices is not muted (sometimes setting your phone to vibrate can do this), and the volume is turned up at least halfway.<\/h5>\nWHERE DID IT GO?<\/b> If you can hear The Goodship flying, but you can’t see it (maybe it flew away!), make sure that your Goodship logo is on screen and land it. It will land back onto the logo.<\/h5>\nJUMPY SHIP?<\/b> If The Goodship seems jittery, make sure you have good light on the logo. Also, if you move the camera away from the logo, The Goodship will continue to fly for a while, but it may become unstable eventually. Get the logo back on your screen and land The Goodship if you’ve lost it.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the product logo, use the light icon in the upper left, below the menu icon, to turn on your flash to see the target. The icon is only present if you actually have a light on your device.<\/h5>\nNO LOGO?<\/b> If you don’t have a Goodship logo to fly it from, you can print one out here<\/a>, or get a friend to download the app and display the preview logo on their screen. You should be able to launch it from there!<\/h5>\n","protected":false},"excerpt":{"rendered":"MESSAGE BAR: At the bottom of the screen is a message bar indicating the status of The Goodship. When you first start, the words “SCAN LOGO TO BEGIN” will appear. Other messages may appear here from time to time. The Goodship logo appears at the center of the message bar: Tap to display a larger<\/p>\n
\nLands The Goodship back down onto the logo. Can be used once The Goodship is in the air.<\/h5>\n<\/h5>\n
\nTIPS:<\/b><\/h5>\nNO SOUND?<\/b> The Goodship makes sounds when it is on screen. If you do not hear it, make sure that your devices is not muted (sometimes setting your phone to vibrate can do this), and the volume is turned up at least halfway.<\/h5>\nWHERE DID IT GO?<\/b> If you can hear The Goodship flying, but you can’t see it (maybe it flew away!), make sure that your Goodship logo is on screen and land it. It will land back onto the logo.<\/h5>\nJUMPY SHIP?<\/b> If The Goodship seems jittery, make sure you have good light on the logo. Also, if you move the camera away from the logo, The Goodship will continue to fly for a while, but it may become unstable eventually. Get the logo back on your screen and land The Goodship if you’ve lost it.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the product logo, use the light icon in the upper left, below the menu icon, to turn on your flash to see the target. The icon is only present if you actually have a light on your device.<\/h5>\nNO LOGO?<\/b> If you don’t have a Goodship logo to fly it from, you can print one out here<\/a>, or get a friend to download the app and display the preview logo on their screen. You should be able to launch it from there!<\/h5>\n","protected":false},"excerpt":{"rendered":"MESSAGE BAR: At the bottom of the screen is a message bar indicating the status of The Goodship. When you first start, the words “SCAN LOGO TO BEGIN” will appear. Other messages may appear here from time to time. The Goodship logo appears at the center of the message bar: Tap to display a larger<\/p>\n
\n
TIPS:<\/b><\/h5>\nNO SOUND?<\/b> The Goodship makes sounds when it is on screen. If you do not hear it, make sure that your devices is not muted (sometimes setting your phone to vibrate can do this), and the volume is turned up at least halfway.<\/h5>\nWHERE DID IT GO?<\/b> If you can hear The Goodship flying, but you can’t see it (maybe it flew away!), make sure that your Goodship logo is on screen and land it. It will land back onto the logo.<\/h5>\nJUMPY SHIP?<\/b> If The Goodship seems jittery, make sure you have good light on the logo. Also, if you move the camera away from the logo, The Goodship will continue to fly for a while, but it may become unstable eventually. Get the logo back on your screen and land The Goodship if you’ve lost it.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the product logo, use the light icon in the upper left, below the menu icon, to turn on your flash to see the target. The icon is only present if you actually have a light on your device.<\/h5>\nNO LOGO?<\/b> If you don’t have a Goodship logo to fly it from, you can print one out here<\/a>, or get a friend to download the app and display the preview logo on their screen. You should be able to launch it from there!<\/h5>\n","protected":false},"excerpt":{"rendered":"MESSAGE BAR: At the bottom of the screen is a message bar indicating the status of The Goodship. When you first start, the words “SCAN LOGO TO BEGIN” will appear. Other messages may appear here from time to time. The Goodship logo appears at the center of the message bar: Tap to display a larger<\/p>\n
WHERE DID IT GO?<\/b> If you can hear The Goodship flying, but you can’t see it (maybe it flew away!), make sure that your Goodship logo is on screen and land it. It will land back onto the logo.<\/h5>\nJUMPY SHIP?<\/b> If The Goodship seems jittery, make sure you have good light on the logo. Also, if you move the camera away from the logo, The Goodship will continue to fly for a while, but it may become unstable eventually. Get the logo back on your screen and land The Goodship if you’ve lost it.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the product logo, use the light icon in the upper left, below the menu icon, to turn on your flash to see the target. The icon is only present if you actually have a light on your device.<\/h5>\nNO LOGO?<\/b> If you don’t have a Goodship logo to fly it from, you can print one out here<\/a>, or get a friend to download the app and display the preview logo on their screen. You should be able to launch it from there!<\/h5>\n","protected":false},"excerpt":{"rendered":"MESSAGE BAR: At the bottom of the screen is a message bar indicating the status of The Goodship. When you first start, the words “SCAN LOGO TO BEGIN” will appear. Other messages may appear here from time to time. The Goodship logo appears at the center of the message bar: Tap to display a larger<\/p>\n
TOO DARK?<\/b> If your lighting isn’t good enough to see the product logo, use the light icon in the upper left, below the menu icon, to turn on your flash to see the target. The icon is only present if you actually have a light on your device.<\/h5>\nNO LOGO?<\/b> If you don’t have a Goodship logo to fly it from, you can print one out here<\/a>, or get a friend to download the app and display the preview logo on their screen. You should be able to launch it from there!<\/h5>\n","protected":false},"excerpt":{"rendered":"MESSAGE BAR: At the bottom of the screen is a message bar indicating the status of The Goodship. When you first start, the words “SCAN LOGO TO BEGIN” will appear. Other messages may appear here from time to time. The Goodship logo appears at the center of the message bar: Tap to display a larger<\/p>\n
MESSAGE BAR: At the bottom of the screen is a message bar indicating the status of The Goodship. When you first start, the words “SCAN LOGO TO BEGIN” will appear. Other messages may appear here from time to time. The Goodship logo appears at the center of the message bar: Tap to display a larger<\/p>\n