As noted above, in order to launch a drone in propellAR, you will need a Launch Pad. This will be your virtual drone’s home base for this session. This can be a book cover, beer coaster, business card, or other handy horizontal graphic object. Good Launch Pads are:<\/h5>\n\n- \n
Rich in detail, i.e. street scene, group of people, collage and mixture of items, sport scenes.<\/h5>\n<\/li>\n
- \n
High in contrast, i.e. bright and dark regions, well-lit.<\/h5>\n<\/li>\n
- \n
Non repetitive, i.e. no grassy fields, checkerboards, granite countertops, or wallpaper.<\/h5>\n<\/li>\n
- \n
Readily available, i.e. book, magazine, beer coaster, business card, etc.<\/h5>\n<\/li>\n<\/ol>\nTo create your Launch Pad, get a suitable image fully in view with your device parallel to the plane of the image surface and no perspective distortion.<\/h5>\nColor bars at the top of the screen will indicate the quality of the Launch Pad candidate. Red indicates a poor target, yellow means acceptable, and green means that you’ve found an excellent Launch Pad.<\/h5>\nWhen you’ve a green bar and are nice and square to the Launch Pad, press the Launch Pad button at the bottom of the screen, and the drone and its control panel will appear. Now you can pull your camera back and fly!<\/h5>\n
\nUsing the Controls<\/h4>\n![\"\"](\"https:\/\/i0.wp.com\/workshop3d.com\/resources\/wp-content\/uploads\/2018\/10\/controls-300x150.jpg?resize=300%2C150\")
<\/a><\/h5>\nThe default propellAR drone uses a dual-joystick control system, just like a real drone. Other available drones have their own control panels and may behave differently.<\/h5>\nOnce you have readied the drone by creating a Launch Pad and viewing the drone on your device, it is ready to fly.<\/h5>\nThe first thing you will do is turn on the power. Press the propellAR button at the bottom of the control panel. The propellers will spin (remember, other drones may behave differently!) and the red light will turn green.<\/h5>\nHolding your device from the bottom of the screen and using your two thumbs to move the purple joysticks, put the drone into the air by moving joystick A in the UP direction. Lower it by moving toward DOWN. Now fly FORWARD, REVERSE, LEFT, and RIGHT by moving joystick B in those directions.<\/h5>\nNote that as you push the joystick further from the center, speed is increased, and that the joystick automatically returns to the center if you lift your tum off of your screen. Start with small movements at the center of the joystick until you get the hang of it. If you let go of both controls, the drone will come to a stop and hover in its current location.<\/h5>\nAlso note that the controls on joystick B move the drone relative to the drone itself, not to you, so the FORWARD direction is always the direction that the drone is facing, which is not necessarily away from you! To rotate the drone to the left or right, move joystick A in the LEFT and RIGHT directions. Other drones may move relative to the target, or to you. Experiment and find out!<\/h5>\nBy controlling elevation and rotation with joystick A and direction with joystick B simultaneously, you should soon have complete control over the flight of the drone!<\/h5>\nThe buttons in the four corners of the control panel activate a trail of smoke, flames, confetti, or bubbles! You can land the drone anywhere yourself, or to bring it to the Launch Pad, press the power button again. The drone will return to the launch and shut off its engines.<\/h5>\n
\nTips<\/h4>\nWHERE DID IT GO?<\/b> You will have better control if the Launch Pad is always in view on the screen somewhere (even behind the controls), but you may be able to follow it with the camera on your device beyond the range of the Launch Pad if your environment has enough background detail for the drone to tell where it is. Notice that the locator arrow always points to the drone, even if you can’t see it. However, if you do lose it, just point your camera at the Launch Pad and press the power button, and your drone will return home.<\/h5>\nJITTERS?<\/b> If the drone seems jittery, make sure you have good light on the Launch Pad. In some cases, if you move the camera away from the Launch Pad, the drone will continue to persist for a while, but it may become unstable eventually. Get the Launch Pad back on your screen to re-orient and stabilize the drone.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the Launch Pad, use the light icon in the upper left or your screen to turn on your flash to see it. The icon is only present if you actually have a light on your device.<\/h5>\n","protected":false},"excerpt":{"rendered":"
Creating a Launch Pad As noted above, in order to launch a drone in propellAR, you will need a Launch Pad. This will be your virtual drone’s home base for this session. This can be a book cover, beer coaster, business card, or other handy horizontal graphic object. Good Launch Pads are: Rich in detail,<\/p>\n
Rich in detail, i.e. street scene, group of people, collage and mixture of items, sport scenes.<\/h5>\n<\/li>\n
High in contrast, i.e. bright and dark regions, well-lit.<\/h5>\n<\/li>\n
Non repetitive, i.e. no grassy fields, checkerboards, granite countertops, or wallpaper.<\/h5>\n<\/li>\n
Readily available, i.e. book, magazine, beer coaster, business card, etc.<\/h5>\n<\/li>\n<\/ol>\nTo create your Launch Pad, get a suitable image fully in view with your device parallel to the plane of the image surface and no perspective distortion.<\/h5>\nColor bars at the top of the screen will indicate the quality of the Launch Pad candidate. Red indicates a poor target, yellow means acceptable, and green means that you’ve found an excellent Launch Pad.<\/h5>\nWhen you’ve a green bar and are nice and square to the Launch Pad, press the Launch Pad button at the bottom of the screen, and the drone and its control panel will appear. Now you can pull your camera back and fly!<\/h5>\n
\nUsing the Controls<\/h4>\n<\/a><\/h5>\nThe default propellAR drone uses a dual-joystick control system, just like a real drone. Other available drones have their own control panels and may behave differently.<\/h5>\nOnce you have readied the drone by creating a Launch Pad and viewing the drone on your device, it is ready to fly.<\/h5>\nThe first thing you will do is turn on the power. Press the propellAR button at the bottom of the control panel. The propellers will spin (remember, other drones may behave differently!) and the red light will turn green.<\/h5>\nHolding your device from the bottom of the screen and using your two thumbs to move the purple joysticks, put the drone into the air by moving joystick A in the UP direction. Lower it by moving toward DOWN. Now fly FORWARD, REVERSE, LEFT, and RIGHT by moving joystick B in those directions.<\/h5>\nNote that as you push the joystick further from the center, speed is increased, and that the joystick automatically returns to the center if you lift your tum off of your screen. Start with small movements at the center of the joystick until you get the hang of it. If you let go of both controls, the drone will come to a stop and hover in its current location.<\/h5>\nAlso note that the controls on joystick B move the drone relative to the drone itself, not to you, so the FORWARD direction is always the direction that the drone is facing, which is not necessarily away from you! To rotate the drone to the left or right, move joystick A in the LEFT and RIGHT directions. Other drones may move relative to the target, or to you. Experiment and find out!<\/h5>\nBy controlling elevation and rotation with joystick A and direction with joystick B simultaneously, you should soon have complete control over the flight of the drone!<\/h5>\nThe buttons in the four corners of the control panel activate a trail of smoke, flames, confetti, or bubbles! You can land the drone anywhere yourself, or to bring it to the Launch Pad, press the power button again. The drone will return to the launch and shut off its engines.<\/h5>\n
\nTips<\/h4>\nWHERE DID IT GO?<\/b> You will have better control if the Launch Pad is always in view on the screen somewhere (even behind the controls), but you may be able to follow it with the camera on your device beyond the range of the Launch Pad if your environment has enough background detail for the drone to tell where it is. Notice that the locator arrow always points to the drone, even if you can’t see it. However, if you do lose it, just point your camera at the Launch Pad and press the power button, and your drone will return home.<\/h5>\nJITTERS?<\/b> If the drone seems jittery, make sure you have good light on the Launch Pad. In some cases, if you move the camera away from the Launch Pad, the drone will continue to persist for a while, but it may become unstable eventually. Get the Launch Pad back on your screen to re-orient and stabilize the drone.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the Launch Pad, use the light icon in the upper left or your screen to turn on your flash to see it. The icon is only present if you actually have a light on your device.<\/h5>\n","protected":false},"excerpt":{"rendered":"
Creating a Launch Pad As noted above, in order to launch a drone in propellAR, you will need a Launch Pad. This will be your virtual drone’s home base for this session. This can be a book cover, beer coaster, business card, or other handy horizontal graphic object. Good Launch Pads are: Rich in detail,<\/p>\n
Color bars at the top of the screen will indicate the quality of the Launch Pad candidate. Red indicates a poor target, yellow means acceptable, and green means that you’ve found an excellent Launch Pad.<\/h5>\nWhen you’ve a green bar and are nice and square to the Launch Pad, press the Launch Pad button at the bottom of the screen, and the drone and its control panel will appear. Now you can pull your camera back and fly!<\/h5>\n
\nUsing the Controls<\/h4>\n<\/a><\/h5>\nThe default propellAR drone uses a dual-joystick control system, just like a real drone. Other available drones have their own control panels and may behave differently.<\/h5>\nOnce you have readied the drone by creating a Launch Pad and viewing the drone on your device, it is ready to fly.<\/h5>\nThe first thing you will do is turn on the power. Press the propellAR button at the bottom of the control panel. The propellers will spin (remember, other drones may behave differently!) and the red light will turn green.<\/h5>\nHolding your device from the bottom of the screen and using your two thumbs to move the purple joysticks, put the drone into the air by moving joystick A in the UP direction. Lower it by moving toward DOWN. Now fly FORWARD, REVERSE, LEFT, and RIGHT by moving joystick B in those directions.<\/h5>\nNote that as you push the joystick further from the center, speed is increased, and that the joystick automatically returns to the center if you lift your tum off of your screen. Start with small movements at the center of the joystick until you get the hang of it. If you let go of both controls, the drone will come to a stop and hover in its current location.<\/h5>\nAlso note that the controls on joystick B move the drone relative to the drone itself, not to you, so the FORWARD direction is always the direction that the drone is facing, which is not necessarily away from you! To rotate the drone to the left or right, move joystick A in the LEFT and RIGHT directions. Other drones may move relative to the target, or to you. Experiment and find out!<\/h5>\nBy controlling elevation and rotation with joystick A and direction with joystick B simultaneously, you should soon have complete control over the flight of the drone!<\/h5>\nThe buttons in the four corners of the control panel activate a trail of smoke, flames, confetti, or bubbles! You can land the drone anywhere yourself, or to bring it to the Launch Pad, press the power button again. The drone will return to the launch and shut off its engines.<\/h5>\n
\nTips<\/h4>\nWHERE DID IT GO?<\/b> You will have better control if the Launch Pad is always in view on the screen somewhere (even behind the controls), but you may be able to follow it with the camera on your device beyond the range of the Launch Pad if your environment has enough background detail for the drone to tell where it is. Notice that the locator arrow always points to the drone, even if you can’t see it. However, if you do lose it, just point your camera at the Launch Pad and press the power button, and your drone will return home.<\/h5>\nJITTERS?<\/b> If the drone seems jittery, make sure you have good light on the Launch Pad. In some cases, if you move the camera away from the Launch Pad, the drone will continue to persist for a while, but it may become unstable eventually. Get the Launch Pad back on your screen to re-orient and stabilize the drone.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the Launch Pad, use the light icon in the upper left or your screen to turn on your flash to see it. The icon is only present if you actually have a light on your device.<\/h5>\n","protected":false},"excerpt":{"rendered":"
Creating a Launch Pad As noted above, in order to launch a drone in propellAR, you will need a Launch Pad. This will be your virtual drone’s home base for this session. This can be a book cover, beer coaster, business card, or other handy horizontal graphic object. Good Launch Pads are: Rich in detail,<\/p>\n
\n
Using the Controls<\/h4>\n<\/a><\/h5>\nThe default propellAR drone uses a dual-joystick control system, just like a real drone. Other available drones have their own control panels and may behave differently.<\/h5>\nOnce you have readied the drone by creating a Launch Pad and viewing the drone on your device, it is ready to fly.<\/h5>\nThe first thing you will do is turn on the power. Press the propellAR button at the bottom of the control panel. The propellers will spin (remember, other drones may behave differently!) and the red light will turn green.<\/h5>\nHolding your device from the bottom of the screen and using your two thumbs to move the purple joysticks, put the drone into the air by moving joystick A in the UP direction. Lower it by moving toward DOWN. Now fly FORWARD, REVERSE, LEFT, and RIGHT by moving joystick B in those directions.<\/h5>\nNote that as you push the joystick further from the center, speed is increased, and that the joystick automatically returns to the center if you lift your tum off of your screen. Start with small movements at the center of the joystick until you get the hang of it. If you let go of both controls, the drone will come to a stop and hover in its current location.<\/h5>\nAlso note that the controls on joystick B move the drone relative to the drone itself, not to you, so the FORWARD direction is always the direction that the drone is facing, which is not necessarily away from you! To rotate the drone to the left or right, move joystick A in the LEFT and RIGHT directions. Other drones may move relative to the target, or to you. Experiment and find out!<\/h5>\nBy controlling elevation and rotation with joystick A and direction with joystick B simultaneously, you should soon have complete control over the flight of the drone!<\/h5>\nThe buttons in the four corners of the control panel activate a trail of smoke, flames, confetti, or bubbles! You can land the drone anywhere yourself, or to bring it to the Launch Pad, press the power button again. The drone will return to the launch and shut off its engines.<\/h5>\n
\nTips<\/h4>\nWHERE DID IT GO?<\/b> You will have better control if the Launch Pad is always in view on the screen somewhere (even behind the controls), but you may be able to follow it with the camera on your device beyond the range of the Launch Pad if your environment has enough background detail for the drone to tell where it is. Notice that the locator arrow always points to the drone, even if you can’t see it. However, if you do lose it, just point your camera at the Launch Pad and press the power button, and your drone will return home.<\/h5>\nJITTERS?<\/b> If the drone seems jittery, make sure you have good light on the Launch Pad. In some cases, if you move the camera away from the Launch Pad, the drone will continue to persist for a while, but it may become unstable eventually. Get the Launch Pad back on your screen to re-orient and stabilize the drone.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the Launch Pad, use the light icon in the upper left or your screen to turn on your flash to see it. The icon is only present if you actually have a light on your device.<\/h5>\n","protected":false},"excerpt":{"rendered":"
Creating a Launch Pad As noted above, in order to launch a drone in propellAR, you will need a Launch Pad. This will be your virtual drone’s home base for this session. This can be a book cover, beer coaster, business card, or other handy horizontal graphic object. Good Launch Pads are: Rich in detail,<\/p>\n
![\"\"](\"https:\/\/i0.wp.com\/workshop3d.com\/resources\/wp-content\/uploads\/2018\/10\/controls.jpg\")
<\/a><\/h5>\nThe default propellAR drone uses a dual-joystick control system, just like a real drone. Other available drones have their own control panels and may behave differently.<\/h5>\nOnce you have readied the drone by creating a Launch Pad and viewing the drone on your device, it is ready to fly.<\/h5>\nThe first thing you will do is turn on the power. Press the propellAR button at the bottom of the control panel. The propellers will spin (remember, other drones may behave differently!) and the red light will turn green.<\/h5>\nHolding your device from the bottom of the screen and using your two thumbs to move the purple joysticks, put the drone into the air by moving joystick A in the UP direction. Lower it by moving toward DOWN. Now fly FORWARD, REVERSE, LEFT, and RIGHT by moving joystick B in those directions.<\/h5>\nNote that as you push the joystick further from the center, speed is increased, and that the joystick automatically returns to the center if you lift your tum off of your screen. Start with small movements at the center of the joystick until you get the hang of it. If you let go of both controls, the drone will come to a stop and hover in its current location.<\/h5>\nAlso note that the controls on joystick B move the drone relative to the drone itself, not to you, so the FORWARD direction is always the direction that the drone is facing, which is not necessarily away from you! To rotate the drone to the left or right, move joystick A in the LEFT and RIGHT directions. Other drones may move relative to the target, or to you. Experiment and find out!<\/h5>\nBy controlling elevation and rotation with joystick A and direction with joystick B simultaneously, you should soon have complete control over the flight of the drone!<\/h5>\nThe buttons in the four corners of the control panel activate a trail of smoke, flames, confetti, or bubbles! You can land the drone anywhere yourself, or to bring it to the Launch Pad, press the power button again. The drone will return to the launch and shut off its engines.<\/h5>\n
\nTips<\/h4>\nWHERE DID IT GO?<\/b> You will have better control if the Launch Pad is always in view on the screen somewhere (even behind the controls), but you may be able to follow it with the camera on your device beyond the range of the Launch Pad if your environment has enough background detail for the drone to tell where it is. Notice that the locator arrow always points to the drone, even if you can’t see it. However, if you do lose it, just point your camera at the Launch Pad and press the power button, and your drone will return home.<\/h5>\nJITTERS?<\/b> If the drone seems jittery, make sure you have good light on the Launch Pad. In some cases, if you move the camera away from the Launch Pad, the drone will continue to persist for a while, but it may become unstable eventually. Get the Launch Pad back on your screen to re-orient and stabilize the drone.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the Launch Pad, use the light icon in the upper left or your screen to turn on your flash to see it. The icon is only present if you actually have a light on your device.<\/h5>\n","protected":false},"excerpt":{"rendered":"
The first thing you will do is turn on the power. Press the propellAR button at the bottom of the control panel. The propellers will spin (remember, other drones may behave differently!) and the red light will turn green.<\/h5>\nHolding your device from the bottom of the screen and using your two thumbs to move the purple joysticks, put the drone into the air by moving joystick A in the UP direction. Lower it by moving toward DOWN. Now fly FORWARD, REVERSE, LEFT, and RIGHT by moving joystick B in those directions.<\/h5>\nNote that as you push the joystick further from the center, speed is increased, and that the joystick automatically returns to the center if you lift your tum off of your screen. Start with small movements at the center of the joystick until you get the hang of it. If you let go of both controls, the drone will come to a stop and hover in its current location.<\/h5>\nAlso note that the controls on joystick B move the drone relative to the drone itself, not to you, so the FORWARD direction is always the direction that the drone is facing, which is not necessarily away from you! To rotate the drone to the left or right, move joystick A in the LEFT and RIGHT directions. Other drones may move relative to the target, or to you. Experiment and find out!<\/h5>\nBy controlling elevation and rotation with joystick A and direction with joystick B simultaneously, you should soon have complete control over the flight of the drone!<\/h5>\nThe buttons in the four corners of the control panel activate a trail of smoke, flames, confetti, or bubbles! You can land the drone anywhere yourself, or to bring it to the Launch Pad, press the power button again. The drone will return to the launch and shut off its engines.<\/h5>\n
\nTips<\/h4>\nWHERE DID IT GO?<\/b> You will have better control if the Launch Pad is always in view on the screen somewhere (even behind the controls), but you may be able to follow it with the camera on your device beyond the range of the Launch Pad if your environment has enough background detail for the drone to tell where it is. Notice that the locator arrow always points to the drone, even if you can’t see it. However, if you do lose it, just point your camera at the Launch Pad and press the power button, and your drone will return home.<\/h5>\nJITTERS?<\/b> If the drone seems jittery, make sure you have good light on the Launch Pad. In some cases, if you move the camera away from the Launch Pad, the drone will continue to persist for a while, but it may become unstable eventually. Get the Launch Pad back on your screen to re-orient and stabilize the drone.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the Launch Pad, use the light icon in the upper left or your screen to turn on your flash to see it. The icon is only present if you actually have a light on your device.<\/h5>\n","protected":false},"excerpt":{"rendered":"
Note that as you push the joystick further from the center, speed is increased, and that the joystick automatically returns to the center if you lift your tum off of your screen. Start with small movements at the center of the joystick until you get the hang of it. If you let go of both controls, the drone will come to a stop and hover in its current location.<\/h5>\nAlso note that the controls on joystick B move the drone relative to the drone itself, not to you, so the FORWARD direction is always the direction that the drone is facing, which is not necessarily away from you! To rotate the drone to the left or right, move joystick A in the LEFT and RIGHT directions. Other drones may move relative to the target, or to you. Experiment and find out!<\/h5>\nBy controlling elevation and rotation with joystick A and direction with joystick B simultaneously, you should soon have complete control over the flight of the drone!<\/h5>\nThe buttons in the four corners of the control panel activate a trail of smoke, flames, confetti, or bubbles! You can land the drone anywhere yourself, or to bring it to the Launch Pad, press the power button again. The drone will return to the launch and shut off its engines.<\/h5>\n
\nTips<\/h4>\nWHERE DID IT GO?<\/b> You will have better control if the Launch Pad is always in view on the screen somewhere (even behind the controls), but you may be able to follow it with the camera on your device beyond the range of the Launch Pad if your environment has enough background detail for the drone to tell where it is. Notice that the locator arrow always points to the drone, even if you can’t see it. However, if you do lose it, just point your camera at the Launch Pad and press the power button, and your drone will return home.<\/h5>\nJITTERS?<\/b> If the drone seems jittery, make sure you have good light on the Launch Pad. In some cases, if you move the camera away from the Launch Pad, the drone will continue to persist for a while, but it may become unstable eventually. Get the Launch Pad back on your screen to re-orient and stabilize the drone.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the Launch Pad, use the light icon in the upper left or your screen to turn on your flash to see it. The icon is only present if you actually have a light on your device.<\/h5>\n","protected":false},"excerpt":{"rendered":"
By controlling elevation and rotation with joystick A and direction with joystick B simultaneously, you should soon have complete control over the flight of the drone!<\/h5>\nThe buttons in the four corners of the control panel activate a trail of smoke, flames, confetti, or bubbles! You can land the drone anywhere yourself, or to bring it to the Launch Pad, press the power button again. The drone will return to the launch and shut off its engines.<\/h5>\n
\nTips<\/h4>\nWHERE DID IT GO?<\/b> You will have better control if the Launch Pad is always in view on the screen somewhere (even behind the controls), but you may be able to follow it with the camera on your device beyond the range of the Launch Pad if your environment has enough background detail for the drone to tell where it is. Notice that the locator arrow always points to the drone, even if you can’t see it. However, if you do lose it, just point your camera at the Launch Pad and press the power button, and your drone will return home.<\/h5>\nJITTERS?<\/b> If the drone seems jittery, make sure you have good light on the Launch Pad. In some cases, if you move the camera away from the Launch Pad, the drone will continue to persist for a while, but it may become unstable eventually. Get the Launch Pad back on your screen to re-orient and stabilize the drone.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the Launch Pad, use the light icon in the upper left or your screen to turn on your flash to see it. The icon is only present if you actually have a light on your device.<\/h5>\n","protected":false},"excerpt":{"rendered":"
\n
Tips<\/h4>\nWHERE DID IT GO?<\/b> You will have better control if the Launch Pad is always in view on the screen somewhere (even behind the controls), but you may be able to follow it with the camera on your device beyond the range of the Launch Pad if your environment has enough background detail for the drone to tell where it is. Notice that the locator arrow always points to the drone, even if you can’t see it. However, if you do lose it, just point your camera at the Launch Pad and press the power button, and your drone will return home.<\/h5>\nJITTERS?<\/b> If the drone seems jittery, make sure you have good light on the Launch Pad. In some cases, if you move the camera away from the Launch Pad, the drone will continue to persist for a while, but it may become unstable eventually. Get the Launch Pad back on your screen to re-orient and stabilize the drone.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the Launch Pad, use the light icon in the upper left or your screen to turn on your flash to see it. The icon is only present if you actually have a light on your device.<\/h5>\n","protected":false},"excerpt":{"rendered":"
JITTERS?<\/b> If the drone seems jittery, make sure you have good light on the Launch Pad. In some cases, if you move the camera away from the Launch Pad, the drone will continue to persist for a while, but it may become unstable eventually. Get the Launch Pad back on your screen to re-orient and stabilize the drone.<\/h5>\nTOO DARK?<\/b> If your lighting isn’t good enough to see the Launch Pad, use the light icon in the upper left or your screen to turn on your flash to see it. The icon is only present if you actually have a light on your device.<\/h5>\n","protected":false},"excerpt":{"rendered":"
Creating a Launch Pad As noted above, in order to launch a drone in propellAR, you will need a Launch Pad. This will be your virtual drone’s home base for this session. This can be a book cover, beer coaster, business card, or other handy horizontal graphic object. Good Launch Pads are: Rich in detail,<\/p>\n